Reach out to us at the office@bthermal.nz
Civil Maintenance
The B-THERMIQ® system is essentially a range of premixed, liquid coatings, specifically designed to create a thermo -reflective shield. With the highest TSR rating on the market, the ultra-thin film reflects a staggering amount of heat and radiation. Uniquely tailored to your required application, you will experience immediate gains. Exclusively distributed by
B-Thermal NZ™ across New Zealand, the Pacific and other selected regions. The ease of application is designed to enhance energy performance and provide lasting protection.
This unique combination is an innovative, energy-efficient solution offering a sustainable alternative to traditional temperature regulating materials. The advanced, ultra-thin thermal coating is sprayed at 0.5mm up to 3.0mm> layered thicknesses, directly onto surface areas whereby gains are experienced immediately. B-THERMIQ® MASS maintains its performance in temperatures up to 280°C and can be sprayed directly onto hot surfaces up to 75°C- reducing the external temperature by up to 140 °C depending on usable substrate .
FOR YOUR FREE ESTIMATE
TECH SPEAK - Tiny (nano-tech) microspheres - hollow spheres almost half the width of human hair, are present in the mix, and are in fact traps adapted to the dimensions of the wavelength of infrared and ultraviolet radiation. The light beams falling into such a trap are reflected by 93% TSR, multiple times and in multiple directions, and are then directed towards the entrance with almost no loss of energy. This molecular behaviour creates an instant thermal shield.
B-THERMIQ® MASS
Value Equivalent: R-5.7 m² x K/W | 0.5mm layer
Heat transfer takes place not only by conduction through partitions (walls, ceilings, etc), but also by radiation. Thermal radiation, or infrared radiation is a fragment of electromagnetic radiation, of which an even smaller fragment is visible light radiation. B-THERMIQ® thermal coatings are created by properly selected resins and reflective thermal material, giving rise to these polymer microspheres.
SYSTEM FEATURES
Thermo-Reflective Shield Ultra-Thin Coating Micro Footprint Nanotech Elastomer-Formula Crack Resistant Vapour Permeability Mould Resistant Fungal/Algae Resistant Lichen Resistant Non-Toxic Asbestos Free Sulphur Resistant Anti Corrosive High PH Acoustic Suppression No Thermal Bridges Superior Adhesion Bio-Degradable Breathable No Heavy Metals Non-Flammable
B-THERMIQ® Nano-Tech coating comprises of a unique blend of ultra-thin liquid that creates a thermo-reflective shield, dispersing 93% radiant heat instead of absorbing it.
B-ThermIQ OUTSIDE creates a screen on the coated surface that reflects the radiation, while allowing the wall to breathe, and thanks to its structure, it removes moisture from the wall. The phenomenon itself can be compared to "pushing” the moisture out of the wall, which is extremely important, especially when renovating buildings under architectural protection.
Walls protected with B-ThermIQ OUTSIDE are dry, which translates to better thermal protection. Securing the façade with the B-ThermIQ OUTSIDE system allows you to save energy spent on heating or cooling the building. 1.0mm thickness stabilizes the wall temperature, protecting external facades against surface tensions related to jumps and consequently, cracks, ensuring its colour lasting for years.
B-ThermIQ ROOF creates a screen on the coated surface that reflects the radiation, which increases the temperature regulation of the roof itself. In months with high irradiation, the temperature differences under the roof may be lower than 40 °C in relation to other surfaces. On the other hand, in the winter months, B-ThermIQ ROOF protects against the loss of heat generated inside. This translates into energy savings spent on heating or cooling the building.
B-ThermIQ ROOF coatings used for protecting roofing felt and roof shingles also improve the mechanical properties of these materials, sealing and strengthen them, repairing damage even up to 5mm wide. When applied to the surface, B-ThermIQ ROOF will act as a rust inhibitor, thus stopping any corrosion of the steel, converting the iron oxide into iron phosphate.
In areas protected with B-ThermIQ INSIDE, the heat flow is even thanks to the thermo-reflective coating from the walls and ceilings in all directions. The heat system is more homogeneous and the maximum temperature variation is 0.5 °C. Limiting differences in temperature slows down air circulation, limiting the migration of dust and pollutants, which contributes to increased comfort for allergy sufferers. Due to the fact that water vapor does not condense on thermal bridges, it does not create an environment conducive to the formation of mold, fungi and bacteria on the walls, especially in areas that are particularly exposed to heat & steam.
B-ThermIQ INSIDE creates a screen on the protected surface that reflects the radiation, and thanks to the even heat distribution, it stabilizes the humidity in every part of the room - unlike traditional paint finishes that only fulfill aesthetic functions. Thermal homogeneity allows you to generate savings of 40% in energy consumption.
B-ThermIQ FLOOR protects surfaces, including floors, concrete, plaster, and OSB board. Thermal and waterproof coating material that is perfect for regulating temperatures in floors, walls, and ceiling surfaces. It’s an excellent choice if you have underfloor heating. Apply it under heating mats or panels to gain additional protection against moisture and cold. With B-ThermIQ FLOOR, you can walk barefoot all year round! B-ThermIQ FLOOR is also ideal for protecting foundations, providing both thermal and waterproof protection.
Temperature under control:
• Effectively reduces heat loss • Provides a warm floor effect • Seals and protects the foundations
Waterproof protection:
• Blocks moisture • Protects against mold and mildew • Preserves and protects floor
B-ThermIQ INVISIBLE is a premixed hydrophobic renovation coating with thermal regulation properties, designed for decorative and protective applications on nearly all surfaces, both exterior and interior. For example, it can be used on residential building facades such as townhouses and homes made of brick or stone. It is also suitable for the facades of heritage-protected buildings, where conventional thermal insulation solutions (e.g. polystyrene, mineral wool) do not meet the criteria for preserving historical urban value.
The special composition of our coating protects surfaces from UV radiation. The clear coating effectively safeguards the historical beauty of buildings, ensuring facades and monuments remain unaffected and their surfaces free from dirt, mould, and fungi.
B-ThermIQ INVISIBLE corrects microcracks while allowing walls to "breathe.” With its thermal reflective properties, it forms a flexible barrier that reflects heat.
B-ThermIQ METAL is a specialized thermal regulating coating designed to protect metal structures, metal and skillion roofing, containers, vats and machines against overheating and moisture condensation.
Designed for decorative and protective coating of metal surfaces made from various materials, especially zinc and/or aluminium sheet metal.
It is an easy-to-apply, environmentally friendly product that offers the following properties: high hiding power, good adhesion to microporous mineral surfaces, coatings with good variable diffusion, resistance to aggressive external conditions including water, excellent resistance to weather and UV radiation, and good coating flexibility, which enhances resistance to cracking and scratching. Greatly reduces the temperature of the surface, thanks to the light-trapping microspheres. It also improves the heat balance of the building, reflecting the radiation from the protected surface.
B-ThermIQ MASS provides a radical reduction in heat emission, in elements that cannot be thermally regulated with traditional methods. E.g. A layer of B-ThermIQ MASS compound, when applied to a surface with a very high temperature (e.g. on pipe conducting hot water vapor), reduces the external temperature of the pipe by up to 140 °C depending on usable substrate .
A thermal reflective, elastomeric, acrylic and polymeric mass. Ecological coating, prepared and intended for 'use' on surfaces that reach up to 280°C. Limits heat or cold loss during fluid transfer. Eliminates thermal bridges and can be sprayed directly onto surfaces with temperatures as high as 75°C. Protects exterior against corrosion, washable and easy to maintain, resistant to mould and mildew, chemical resistant.
Thanks to the elastomer formula, the dough is highly flexible
and heat resistant.
B-THERMIQ® ULTRA-THIN THERMAL COATING
-
Energy Efficiency: Reduced heating and cooling costs, saving money over time.
-
Temperature Regulation: Maintaining a comfortable interior temperature, regardless of external conditions.
-
Noise Reduction: Acoustic regulation helps dampen noise, creating peaceful environment inside dwellings.
-
Condensation Prevention: Proper protection helps reduce condensation, which can damage the structure.
B-THERMIQ® System:
Total Solar Reflectance (TSR) is measured at 93%.
Solar Reflectance Index (SRI) reaches 118%, exceeding conventional cool roof materials.
Emissivity (ε) is high at 0.86, allowing surfaces to release absorbed temperatures effectively.
B-THERMIQ® products create a thermal shield that reflects heat and radiation. This shield is formed by vacuum microspheres tailored to the dimensions of thermal radiation wavelengths, acting like a labyrinth of mirrors.
With the highest TSR (Total Solar Reflectance) on the market, reflecting 93% of thermal energy and featuring high emissivity, as the radiation beam attempting to pass through it is reflected multiple times and redirected back, with virtually no energy absorption.
Key:
*TSR: Total Solar Reflectance = Accounts for the entire reflected solar spectrum, which includes infrared (IR) heat and visible light (High % is better)
*SRI: Solar Reflectance Index = Indicates the ability of a materials capacity to return solar energy to the atmosphere, combine light & heat readings (High % is better)
*ε: Thermal Emissivity = Allows surfaces to release absorbed energy as heat effectively (0-100 - High is better)
*R-Value: Mathematical Equivalent = Measures thermal resistance - slowing the cold or heat flow (High values are better)
Say goodbye to unnecessary expenses and losses immediately
Protect your building with effective, ultra-thin thermal regulation - B-THERMIQ® .
You’ll start saving on heating and cooling costs, effective immediately .
Poor temperature regulation = Huge bills to pay
When heat literally escapes through your walls, and moisture and mould appear on them, you lose your money. Repair bills can cost a fortune. B-THERMIQ® is the best practice alternative.
Say goodbye to unnecessary expenses and losses immediately
Protect your building with effective, ultra-thin thermal regulation - B-Thermal NZ™.
You’ll start saving on heating and cooling costs, effective immediately .
Poor temperature regulation = Huge bills to pay
When heat literally escapes through your walls, and moisture and mould appear on them, you lose your money. Repair bills can cost a fortune. B-Thermal NZ™ is the best practice alternative.