Reach out to us at the office@bthermal.nz
B-THERMIQ® FLOOR is a ready-to-use product, intended as a material to thermally regulate floor surfaces for heating installations - underfloor heating, heating mats, and heating panels. It reflects heat back into the room, increasing heating efficiency. A waterproof solution that is perfect for regulating temperatures on floors, walls, and ceiling surfaces while also providing moisture protection.
BENEFITS:
✔ Reduces wall heat gain in summer – reflects up to 94% of solar radiation, preventing the building from overheating.
✔ Minimizes heat loss in winter – retains heat inside, reducing heating costs.
✔ Lower energy bills – reduces the need for air conditioning and heating.
✔ Weather resistance – protection against UV radiation, rain, wind, and pollution.
✔ Self-cleaning properties – reduces dust and dirt buildup, reducing the need for frequent cleaning.
✔ Durability and aesthetics – long-lasting coating, resistant to fading.
SYSTEM FEATURES
Thermo-Reflective Shield Ultra-Thin Coating Micro Footprint Nanotech Elastomer-Formula Crack Resistant Vapour Permeability Mould Resistant Fungal/Algae Resistant Lichen Resistant Non-Toxic Asbestos Free Sulphur Resistant Anti Corrosive High PH Acoustic Suppression No Thermal Bridges Superior Adhesion Bio-Degradable Breathable No Heavy Metals Non-Flammable
Product Application
B-THERMIQ® FLOOR protects surfaces, including floors, concrete, plaster, and OSB board. Thermal and waterproof coating material that is perfect for regulating temperatures in floors, walls, and ceiling surfaces. It’s an excellent choice if you have underfloor heating. Apply it under heating mats or panels to gain additional protection against moisture and cold. With B-THERMIQ® FLOOR, you can walk barefoot all year round! B-THERMIQ® FLOOR, is also ideal for protecting foundations, providing both thermal and waterproof protection.
Performance Parameters:
- Environmentally friendly product
- Excellent thermal insulation in a thin coating
- Creates a thermal shield, which turns into energy savaging consumption for heating or cooling
- Easy to apply
- Very durable
- Coats with good variable diffusion
- Low VOC content
Application:
To achieve the minimum coverage, it is recommended to use a minimum of two layers. Carry out the work at the temperature of the substrate and ambient temperature from + 15°C to + 40°C, mix thoroughly before application. The thickness of the first layer is 0.50 mm, the subsequent layers should be applied up to a maximum of 3.00 mm to obtain adequate insulation. Apply the second layer about 6 hours after applying the first layer. Apply with a hybrid spray gun enabling a relatively smooth layer of the coating on the surface. After completing the work, wash the tool with water in accordance with the recommendations of the tool's manufacturer.
Concept Models:
Industrial and warehouse buildings / Facades of residential, office and commercial buildings / Modular and container construction / Public facilities (hospitals, schools, offices) / Renovation of facades of older buildings / Lightweight buildings where minimum insulation thickness is important / Buildings exposed to intense solar radiation , where the priority is to reduce façade overheating
B-THERMIQ® ULTRA-THIN THERMAL COATING
-
Energy Efficiency: Reduced heating and cooling costs, saving money over time.
-
Temperature Regulation: Maintaining a comfortable interior temperature, regardless of external conditions.
-
Noise Reduction: Acoustic regulation helps dampen noise, creating peaceful environment inside dwellings.
-
Condensation Prevention: Proper protection helps reduce condensation, which can damage the structure.
B-THERMIQ® System:
Total Solar Reflectance (TSR) is measured at 93%.
Solar Reflectance Index (SRI) reaches 118%, exceeding conventional cool roof materials.
Emissivity (ε) is high at 0.86, allowing surfaces to release absorbed temperatures effectively.
B-THERMIQ® products create a thermal shield that reflects heat and radiation. This shield is formed by vacuum microspheres tailored to the dimensions of thermal radiation wavelengths, acting like a labyrinth of mirrors.
With the highest TSR (Total Solar Reflectance) on the market, reflecting 93% of thermal energy and featuring high emissivity, as the radiation beam attempting to pass through it is reflected multiple times and redirected back, with virtually no energy absorption.
Key:
*TSR: Total Solar Reflectance = Accounts for the entire reflected solar spectrum, which includes infrared (IR) heat and visible light (High % is better)
*SRI: Solar Reflectance Index = Indicates the ability of a materials capacity to return solar energy to the atmosphere, combine light & heat readings (High % is better)
*ε: Thermal Emissivity = Allows surfaces to release absorbed energy as heat effectively (0-100 - High is better)
*R-Value: Mathematical Equivalent = Measures thermal resistance - slowing the cold or heat flow (High values are better)
Say goodbye to unnecessary expenses and losses immediately
Protect your building with effective, ultra-thin thermal regulation - B-THERMIQ® .
You’ll start saving on heating and cooling costs, effective immediately .
Poor temperature regulation = Huge bills to pay
When heat literally escapes through your walls, and moisture and mould appear on them, you lose your money. Repair bills can cost a fortune. B-THERMIQ® is the best practice alternative.